RAH Forklift Bearings

What is Forklift bearing?

Forklift bearings Forklift bearings are a very important hardware components used in forklift trucks, forklift bearings play an irreplaceable role in the work of forklift trucks.

Basic Information

Forklift bearings are different from general bearings, which are better than general bearings in terms of done, bearing materials and performance. Industrial handling vehicles are widely used in ports, stations, airports, freight yards, factory workshops, warehouses, distribution centres and distribution centres, etc., and can enter the cabin, carriages and containers for loading, unloading and handling of palletized goods. It is an indispensable equipment for pallet transport and container transport. Forklift plays a very important role in the logistics system of the enterprise, and is the main force in the material handling equipment. Widely used in stations, ports, airports, factories, warehouses and other sectors of the national economy, it is a highly efficient equipment for mechanised loading and unloading, stacking and short-distance transport. Self-propelled forklift appeared in 1917. During the Second World War, forklift trucks were developed. China started to manufacture forklifts from the early 1950s. Especially with the rapid development of China's economy, the material handling of most enterprises has been separated from the original manual handling and replaced by the mechanised handling mainly by forklift trucks. As a result, the demand for forklift market in China has been growing at a double-digit rate every year in the past few years.

Product Lubrication

Forklift bearing lubrication, first of all, open the cover, observe the wear of the separation bearing, if you confirm that there is no damage to the bearing or wear does not exceed the limit, then remove the clutch pedal, adjust the top lever, so that the separation bearing and its seat back to the last position, with a pointed grease gun to the hole in the bearing seat to add grease, until the bearing oil overflow, and then slightly rotate the bearing, once again oil injection, repeat the above work until the bearing around a little bit of grease overflow. Repeat the above work until there is a little grease overflow around the bearings, then make the bearings rotate and observe the oil quantity, if you feel the bearing rotates with resistance, it proves that the bearings have been filled with grease. Then remove the small amount of grease overflowing from all parts of the separation bearing seat and readjust the position of the separation bearing.

Precautions
I. Keep forklift truck bearings and their surroundings clean

Even if the smile dust invisible to the naked eye enters the forklift truck bearings, it will increase the wear, vibration and noise of IKO bearings.

Second, the use of installation should be careful and meticulous

Do not allow strong stamping, do not allow the use of hammers to directly strike the forklift truck bearings, do not allow the rolling body through the transfer of pressure.

Third, the use of appropriate and accurate installation tools

Try to use special tools, and strongly avoid the use of cloth and short fibres and the like.

Prevent the rusting of forklift truck bearings.

When taking forklift truck bearings directly by hand, wash off the sweat on your hands sufficiently and apply high-quality mineral oil before operation, and pay particular attention to rust prevention in the rainy season and summer.

However, under certain special operating conditions, forklift truck bearings can have a longer life than traditionally calculated, especially under light loads. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a film of lubricant and limit the surface damage that may be caused by contaminants.

Welcome send us the bearing items for the quotation to enjoy the first hands factory price

#Forkliftbearings #bearing #bearings #skf #fag #ntn #nsk #fag #timken #koyo #ina #rah #rahbearings